DJI Mavic Pro Downloads & Manuals
※ Download: Mavic air user manual
Then, the aircraft needs to be able to visually recognize the pattern of the ground it took off from, for example cracks or other identifiable patterns. Firmware updates can enhance performance, so updating to the latest firmware is highly recommended.
C1 is set by default and can be used during normal flight or while using Intelligent Flight Modes. The Mavic Air supports the following panorama modes: Vertical: The camera automatically takes three vertical photos, stitching them into one panorama. Refer to the Mavic Air Propeller Guards User Guide to learn more.
Dji MAVIC AIR User Manual - Getting the Air up and running feels a little like solving a 3D puzzle. Read about how to build your own done.
© 2018 DJI All Rights Reserved. For safety reasons it is recommended that the propeller guards are mounted when flying in Beginner Mode or indoors. Refer to the Mavic Air Propeller Guards User Guide to learn more. It is recommended that the gimbal protector be attached when the aircraft is not in use. Forward Vision System 2. Landing Gear with built-in antennas 6. Gimbal and Camera 7. Camera microSD Card Slot 11. Follow the steps below to activate the Mavic Air using the DJI GO 4 app: 1. Connect your mobile device to the remote controller and then launch DJI GO 4. © 2018 DJI All Rights Reserved. Refer to the aircraft diagram in the Product Profile section. Flight Modes The Mavic Air has two flight modes that users can select, plus a third flight mode that the aircraft falls back to in certain circumstances: P-mode Positioning : P-mode works best when the GPS signal is strong. The aircraft utilizes GPS and the Vision Systems to locate itself, stabilize, and navigate between obstacles. The positions of these LEDs are shown in the figure below: Front LED Front LED Aircraft Status Indicator The Front LEDs show the orientation of the aircraft and the status of some of the functions refer to the function sections for more details. If there is danger of collision occurring, push the throttle up and try to navigate away. If the battery level is sufficient the battery level indicator bar in the DJI GO 4 app displays the estimated remaining flight time based on current battery level. If the RTH at Current Altitude option is enabled the default setting in DJI GO 4 the aircraft flies to the Home Point at the current altitude, unless the current altitude is less than 2. When Landing Protection determines that the ground is suitable for landing, the Mavic Air will land gently. If Landing Protection determines that the ground is not suitable for landing, the Mavic Air will hover and wait for pilot confirmation. No further action is required. Using the Downward Vision System, the aircraft can hover precisely even without GPS. The Downward Vision System is typically used in indoor environments where GPS is unavailable. The Downward Vision System works best when the aircraft is at altitudes of 1. The Mavic Air records a video according to the selected shooting mode and then automatically generates a 10-second video. The video can then be viewed, edited, or shared to social media from the playback menu. Only use QuickShots in wide open areas. Exiting QuickShots in DJI GO 4 or toggle the Flight Mode switch to S-mode to exit QuickShots anytime during shooting. Press the Flight Pause button on the remote controller for emergency breaking. The remote controller controller or the slider in DJI on the remote control to fly in a can be used to maneuver the GO 4 to fly in a circle around circle around the subject. The Mavic Air features brand new modes like GestureLaunch, Follow, and GestureLand. Note: Aircraft firmware v1. Keep your palm open and your fingers close together. After about two seconds the Front LEDs will blink green slowly to indicate that PalmControl has been activated. Once Follow is activated, the front LEDs will turn solid green. As you move your body, the Front LEDs solid aircraft will follow you automatically. In Tripod mode, the maximum flight speed is limited to 2. Responsiveness to stick movements is also reduced for smoother, more controlled movements. A prompt will appear if the target cannot be reached. The aircraft will hover for three seconds and await pilot commands. This can be done by flying your Mavic Air outdoors until there is less than 30% charge left or until the Intelligent Flight Battery no longer turns on. Flying at a location farther than 31 miles 50 km away from the last flight location. The aircraft has not been flown for more than 30 days. Hold the aircraft horizontally and rotate it 360 degrees. The Aircraft Status Indicator will turn solid green. To start updating, connect your mobile device to the Internet and follow the on-screen instructions. MAVIC is a trademark of DJI. Copyright © 2018 DJI All Rights Reserved.
Racing enthusiasts will find wide range of super fast. To start updating, connect your mobile device to the Internet and follow the on-screen instructions. You can switch between these two frequency bands in the Wi-Fi Settings menu in the DJI GO app. We help everyone from newbies to professional flyers to discover the latest. We help everyone from newbies to professional flyers to discover the latest. It is recommended that the gimbal protector be attached when the aircraft is not in use. Some computer screens may be unable to calibrate.
